News:

Create A Forum Installed

  3. MT-01 Stock muffler mod
« previous next »
Pages: [1]

Author Topic: MT-01 Stock muffler mod  (Read 2570 times)

0 Members and 39 Guests are viewing this topic.

MT-01 Stock muffler mod
« on: »
Glad to be back!!!

The old MTOC had a lot of info about modded stock mufflers, but unfortunatelly... now it's gone, since Lazarus took it of in his Diavel...  ;D
For the register, here is the mod I made to mine:




Here is the sound after bringing the db killer out of the caps (the overun noise was terrible):




And with the larger 50mm db killers:



Still have to make the Akra style endcaps...
Logged

Share on Bluesky Share on Facebook

Re: MT-01 Stock muffler mod
« Reply #1 on: »
About 2 years ago a fantastic popping sound alerted me to the fact that the entire contents of my righthand side Ralph Elliott modded silencer had launched itself down the A38!
So I rebuild them from scratch myself.
I found the best sound and performance came from packing them with stainless steel wool pads (like Brillo Pads).
I used stainless steel perforated tube inside and machined aluminium end caps from solid billet on my lathe.
Sound is lovely,louder than standard but not as loud as the 'Ralph Elliots'.
I would recommend the Elliot nodded silencer  mine were 3 years old before the rh one launched itself.


Logged
Re: MT-01 Stock muffler mod
« Reply #2 on: »
I hope that never happens to me.

I did use 8 bolts on each machined cap just to be sure, as the pressure inside the muffler must be bery high (especially with resctricted ends using a db killer).
True the db killers just use 4 of them, but the akras used just 3... should be fine (crossing fingers).

Logged
Re: MT-01 Stock muffler mod
« Reply #3 on: »
Kodo...kudos on your skills & the excellent mod whisperdancer  8)
Logged
Pages: [1]
« previous next »
  3. MT-01 Stock muffler mod