News:

Create A Forum Installed

  3. Braided Hoses
« previous next »
Pages: [1]

Author Topic: Braided Hoses  (Read 3457 times)

0 Members and 21 Guests are viewing this topic.

Braided Hoses
« on: »
Afternoon All,

As the MT is going in for the Barnett im looking at what else could be done. IIRC braided hose kits we're a bit iffy as the Clutch kit needs a custom to run the whole length and i seem to remember some brake line kits weren't quite long enough either. For my old MT i had the pipes made to order but are there any decent kits available that work without modifying?

Cheers

Nat
Logged

Share on Bluesky Share on Facebook

Re: Braided Hoses
« Reply #1 on: »
Hi Nat,

I bought Venhill front & rear hose kit for the MT-01 which were fine for length, however I had to go back to them for a custom length when I changed to my current set up but they're good hoses and come with all the correct banjos etc.

Max
Logged
Agree Agree x 1 View List
Re: Braided Hoses
« Reply #2 on: »
I used the Wezmoto ones from fleabay, iirc £90 for front and back brakes with the standard 3 line setup for the fronts. No problems with the length or the way that they fitted
Logged
Re: Braided Hoses
« Reply #3 on: »
Get a custom hose made up....Its easy really.
  Get the banjo crank &^ length right and its simple enough....The banjos can be rotated before you fit them. Wezmoto are cheap but man, I hate those fixed fuckers with twisting and length issues...Ive done a few set ups now. If its OEM, thats one thing. If its an aftermarket "kit"..I tend steer clear these days. I know Goodrich offer coloured banjos and **** but this coating is soon flaking off, once you start warming the brakes up !
  I use Helperformance "build a line"..Not the same colourful array of options but does what it says....
  I just did the clutch hose as it happens... !
Logged
Re: Braided Hoses
« Reply #4 on: »
I did have custom lines on the old one as the dealer i used to get serviced at had all the gear and as the clutch line is a mix of hose & pipe he ran one the full length following the guide on the old forum. Have you still got the length handy Tim?

B->
Logged
Re: Braided Hoses
« Reply #5 on: »
Not sure how handy it is- I'll have a look as I may have kept the old line....
Logged
Like Like x 1 View List
Re: Braided Hoses
« Reply #6 on: »
check your local hydraulic service techs, theyll usually do custom...
hydraulic hoses or hydraulic pistons YMMV
Logged
Re: Braided Hoses
« Reply #7 on: »
Just looked at the order details for the clutch hose I fitted a week or so back...
  Reads: custom length - 180cms
  Apparently I opted for straight banjos at both ends.
  I strongly recommend you measure your own though mate.

  Hope it helps.....
 
Logged
Like Like x 1 View List
Pages: [1]
« previous next »
  3. Braided Hoses