News:

Create A Forum Installed

Recent Posts

Pages: 1 2 3 [4] 5 6 ... 10
31
General Discussion / Startermotor
« Last post by crispy on May 01, 2023, 06:54:09 pm »
Evening , my MT is just clicking when I hit the starter button so guessing the motors packed up , seems the starters behind the oil tank  on left hand side is it remove the complete  tank to get to it and wheres best place to get one ??
32
MT-01 / Chain and sprockets
« Last post by Another Aussie on April 22, 2023, 11:19:38 am »
Had to replace at 30,000 kms.   Less than I thought.  Maybe someone rode it too hard.   Would this make much difference?  Why? 
33
MT-01 / Re: miss fire / coil
« Last post by mt01ash on April 14, 2023, 08:35:18 pm »
the old pc 3 didn't run well on the MT01 but the PCv runs very well my Akros headers had a o2 plug fitted so the pc5 reads the co from that must say it runs very well
34
MT-01 / Re: Michael ECU flashing Germany
« Last post by mt01ash on April 14, 2023, 08:26:59 pm »
sorted
35
MT-01 / Re: Titanium exhaust - new supplier
« Last post by mt01ash on April 14, 2023, 08:26:19 pm »
Very nice for the price a little worried about no carbon heat shield at the top like Akros 
36
MT-01 / Titanium exhaust - new supplier
« Last post by Nikk on March 24, 2023, 09:10:42 am »
Found these guys online. Very similar to the Stage 2 Aero collectors and doesn't seem bad price.

http://www.fresco-exhaust.com/mt01-collector-p-717.html
37
MT-01 / Re: rebound damping range
« Last post by littletriple on January 06, 2023, 09:11:16 am »
Cheers Nikk,

Martin.
38
MT-01 / Re: rebound damping range
« Last post by Nikk on January 06, 2023, 09:06:21 am »
hi - don't know the answer, but there are plenty of YouTube videos showing how to adjust until you get the right reaction from fork dive.
39
MT-01 / rebound damping range
« Last post by littletriple on December 14, 2022, 05:56:22 pm »
Hi all,

does anyone know how many clicks there should be on the rebound damping (range) on the standard forks. The manual doesn't seem to say.

I assume that one should always work from max clockwise as a datum & back out from there regardless of the number of clicks actually available available? 
40
MT-01 / Re: miss fire / coil
« Last post by Nikk on November 22, 2022, 08:47:24 am »
Do you have a Power Commander fitted? They don't play well with the standard MT ECU.
Pages: 1 2 3 [4] 5 6 ... 10