News:

Create A Forum Installed

  2. Recent Posts

Recent Posts

Pages: 1 2 3 [4] 5 6 ... 10
31
General Discussion / Re: Startermotor
« Last post by Saint Rob on May 07, 2023, 11:15:33 pm »
Check your starter solenoid, I had the same issue a few years ago for a while and changed it to resolve the problem. Genuine ones are silly money but there are plenty on Fleabay which are good quality.
32
General Discussion / Re: Startermotor
« Last post by Nikk on May 05, 2023, 04:58:46 pm »
Could just be a bad battery.
33
MT-01 / Re: Under seat wires
« Last post by Nikk on May 05, 2023, 04:57:10 pm »
Has it got a single seat? Could be the connections for the old under seat fans.
34
MT-01 / Re: Rolling
« Last post by Nikk on May 05, 2023, 04:56:20 pm »
Do you mean a slipping feeling on corners?  Have you checked head bearings are OK?
35
MT-01 / Rolling
« Last post by Rocke on May 04, 2023, 09:40:58 pm »
I've just recently and all of a sudden got a rolling sensation on the front end, weights are still there for balancing, tyre has tread and psi, anybody had this and found out what causes it, 😊
36
MT-01 / Under seat wires
« Last post by edv2009 on May 03, 2023, 11:56:22 pm »
Hi everyone!

Thanks for adding me to the group. I just picked up a 2006 MT01, and it’s had some previous work on it. Aftermarket exhaust, tail tidy etc.

There are a host of other wires under the seat I have no idea what they are for?

I’ll share a pic, but if someone could help me identify them, I’d really appreciate it.
37
General Discussion / Startermotor
« Last post by crispy on May 01, 2023, 06:54:09 pm »
Evening , my MT is just clicking when I hit the starter button so guessing the motors packed up , seems the starters behind the oil tank  on left hand side is it remove the complete  tank to get to it and wheres best place to get one ??
38
MT-01 / Chain and sprockets
« Last post by Another Aussie on April 22, 2023, 11:19:38 am »
Had to replace at 30,000 kms.   Less than I thought.  Maybe someone rode it too hard.   Would this make much difference?  Why? 
39
MT-01 / Re: miss fire / coil
« Last post by mt01ash on April 14, 2023, 08:35:18 pm »
the old pc 3 didn't run well on the MT01 but the PCv runs very well my Akros headers had a o2 plug fitted so the pc5 reads the co from that must say it runs very well
40
MT-01 / Re: Michael ECU flashing Germany
« Last post by mt01ash on April 14, 2023, 08:26:59 pm »
sorted
Pages: 1 2 3 [4] 5 6 ... 10