MT Owners Club
General Category => MT-01 => Topic started by: mt01ash on August 22, 2018, 10:16:24 am
-
yes thanks looks like you have put a spacer in just finding it hard because the boomerang thing has a threaded hole as well as the foot rest so think I need to make 2 spacers to keep the footrest level
You'll need to drill out the threaded hole and bolt right though
-
yes thanks looks like you have put a spacer in just finding it hard because the boomerang thing has a threaded hole as well as the foot rest so think I need to make 2 spacers to keep the footrest level
-
(https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/30bf06a5-2144-44cd-8dc9-913cd539b6f4-original.jpg?width=1920&height=1080&fit=bounds) (https://beta.photobucket.com/u/JocktheRocker/p/30bf06a5-2144-44cd-8dc9-913cd539b6f4)
(https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/8c9eeed7-cae9-4c4f-a917-9c6ece139ef9-original.jpg?width=1920&height=1080&fit=bounds) (https://beta.photobucket.com/u/JocktheRocker/p/8c9eeed7-cae9-4c4f-a917-9c6ece139ef9)
Any Help?
-
was thinking of that but seats are easy to find Carbone tails are not
could I ask you to do a better photo of the rear foot rest and see how the boomerang part been put on
Thanks Ash
-
Arr I see what you're doing now, I did the same but cut the carbon tail so the seat stayed whole
(https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/6693d028-8f46-44ea-873a-207ebfdf5109-original.jpg?width=1920&height=1080&fit=bounds) (https://beta.photobucket.com/u/JocktheRocker/p/6693d028-8f46-44ea-873a-207ebfdf5109)
(https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/cb4fa146-edac-455e-86c3-4d2806b86ccf-original.jpg?width=1920&height=1080&fit=bounds) (https://beta.photobucket.com/u/JocktheRocker/p/cb4fa146-edac-455e-86c3-4d2806b86ccf)
As I said you'll have to drill out the plate and bolt the footrest right though with maybe a spacer or two I can't really remember it was a while ago and I'm not running with that set up now
-
All done rear foot rest to put back on with the single seat set up
-
OK made the cut looks like it fits ok and locks in so ill add some webbing and recover
-
Thanks you its a start I do think my old one was cut more as it needs to let the carbon tail cover to fit into the cut out think I may need to remove the carbon tail and cut around it but will try this first Thanks
This is a Yamaha made single seat (they do look rough) but sounds like a good plan using the tail piece as a pattern :)
Just seen this, I,ll do a pic for you tomorrow. They are just a standard base cut off pretty rough.
Sorry, busy busy, tomorrow, promise.
-
Thanks you its a start I do think my old one was cut more as it needs to let the carbon tail cover to fit into the cut out think I may need to remove the carbon tail and cut around it but will try this first Thanks
This is a Yamaha made single seat (they do look rough) but sounds like a good plan using the tail piece as a pattern :)
Just seen this, I,ll do a pic for you tomorrow. They are just a standard base cut off pretty rough.
-
Thanks you its a start I do think my old one was cut more as it needs to let the carbon tail cover to fit into the cut out think I may need to remove the carbon tail and cut around it but will try this first Thanks
This is a Yamaha made single seat (they do look rough) but sounds like a good plan using the tail piece as a pattern :)
-
Thanks you its a start I do think my old one was cut more as it needs to let the carbon tail cover to fit into the cut out think I may need to remove the carbon tail and cut around it but will try this first Thanks
-
(https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/02d2543b-7e7e-494e-abd3-40319822f996-original.jpg?width=1920&height=1080&fit=bounds) (https://beta.photobucket.com/u/JocktheRocker/p/02d2543b-7e7e-494e-abd3-40319822f996)
(https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/897f2b96-a982-4387-a1e4-7917c4ea1dde-original.jpg?width=1920&height=1080&fit=bounds) (https://beta.photobucket.com/u/JocktheRocker/p/897f2b96-a982-4387-a1e4-7917c4ea1dde)
(https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/47f1c540-b7c4-43ab-b418-e9ca174872d7-original.jpg?
width=1920&height=1080&fit=bounds) (https://beta.photobucket.com/u/JocktheRocker/p/47f1c540-b7c4-43ab-b418-e9ca174872d7)
(https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/b11f4280-1f21-4da0-8c34-96ba628024ea-original.jpg?width=1920&height=1080&fit=bounds) (https://beta.photobucket.com/u/JocktheRocker/p/b11f4280-1f21-4da0-8c34-96ba628024ea)
Hope this will help :)
-
Nikk's got a single seat on his SP hasn't he, have you tried sending a PM?
-
OK I have a dual seat that I want to cut out the rear part so I can use it with the single seat setup I had one previous mt01 but lost the photo as to wear to cut the plastic has anyone got a photo of the under side of the cut sea so I can copy it